Method 1 - Best for Toe Rings (but can be used for thumb and
pinky rings as well)

1. Print and then cut out one of the strips below (note: the second is
used only if the first one rips).
Ring sizer should be
approximately 2 11/16  inches
when printed in full size.. To print:
click on sizer which will show a  
new screen. Hit
File and Print
SIZING
Method 2- Use for Toe Rings, Thumb Rings, and Finger Rings

1. Take two twist ties (that you get from grocery store products) and
wrap each one around the toe (one at the nail and the other at the first
joint). Tighten by spinning the tie ends around each other a few times.
Use one tie for each area of the toe. Remove the ties from your toe,
taking care to remove it without opening it. You should use Windex to
remove the tie that is wrapped around the middle of the toe, since this
is the smaller area and the tie will not come off easily without using a
lubricant. Send the ties to us (indicate which one was at the joint) and
we will size the ring for you.

Be sure to indicate whether you want a toe, thumb, or finger ring.
Method 3 - Use for Toe Rings, Thumb Rings, and Finger Rings

1. Using two pieces of dental floss (or string), measure your toe,
thumb, or finger using steps 2 and 3 in
Method 1 above.
2. Make a mark with a pencil or
pen on the dental floss where they
cross each other.
3. Send this to us and we will size
the ring for you.

Be sure to indicate whether you want a toe, thumb, or finger ring.
2. To help when measuring, place a small piece of tape at the left side
of the sizer to keep it in place. This will allow you to obtain a more
accurate size.
3. Wrap the strip around the two parts of the second toe (or any toe
that you choose) just past the nail and in the middle of the toe where
you will wear the ring. (Note: most people find the second toe the
most comfortable..)
4. After obtaining these two numbers, write them down being sure to
indicate where each measurement was taken (right behind the nail and
at the first joint). These two numbers are to be returned to us. If you are
obtaining a reading over size 5, don’t think you have a large toe.
(Remember that rings come in half sizes, so when measuring be as
accurate as possible.) If for some reason the ring is not the correct
size when you receive it, you can return it to us for a different size.
Use of dental floss to determine toe ring size
There are 3 ways to size your toe ring; look at all methods to see
which would be best for you.
(Note: Women think their toe is larger than it really is.)

If you need help sizing your toe, just give us a call at:
941.266.0483.
Copyright 2013. Johnston Press, Inc.
Rings that fit well
are our first priority
Ready to order?
Got Questions? Call Us
941-266-0483